SYM T2 250i
The SYM T2 250i was born for speed. Light weight, superb handling, board power band and unmatched build quality & attention to details. SYM T2 250i is a great combination of performance, handling and exciting sport bike style, but also with a low seat height that's adjustable to fit a wider variety of riders and also narrower where it counts make it even easier to put both feet on the ground. The Ergonomic designed seat is comfortable for both single and double riders. The front disc offers exceptional cooling, braking and safety. The headlight is equipped with a H4 60W Halogen lamp and four LED Daytime Running Lights for extra brightness and wider sight.
The 250cc liquid-cooled 4-stroke with 4 valve fuel injection engine is ready to respond with smooth, linear performance when the rider twists the throttle. Maximum output is achieved at a spirited 7500 rpm and maximum torque is obtained at 6000rpm.
The T2 is built for performance and designed to provide the right rigidity balance to contribute to smooth cornering. The diamond shaped frame, made of light weight & high-tensile steel material also using the engine as a structural member of the chassis, becomes the foundation for handling performance.
The T2 boasts an EFI System intelligent Injection System utilizes computer programs to calculate the oxygen content ratio in the air and control the fuel emission to achieve complete combustion, full power rapid start up, fuel efficiency, low pollution and acceleration enhancement. Particularly in respect to environmental protection, this system an help reduce pollution up to 30% and decrease fuel consumption by 15% without any catalyzer device. SYM's EFI system possesses warm impaction of induction, crank rotational speed, oxygen sensor cohering with the Environmental Protection Regulations and engine temperature sensor. Collecting comprehensive conditions of the car and roads it can proceed with the precise calculation and determine a perfect fuel injection volume, air-fuel ratio and ignition timing in order to achieve more powerful energy and less pollution emissions, as well as, to develop the best performance of the engine.
The 4 valve engine mechanism not only increases air intake but also considerably improves engine efficiency over the uneven fuel concentration problem inherent in 2 valve engine combustion chambers to allow more complete combustion and better fuel economy, as well as, to effectively reduce noise and exhaust pollution.
T2 250i mounts tubeless radial tires on cast aluminum wheels. While their lightweight construction helps centralize mass, they also help contribute to agile handling. From 110/70-17" and rear 140/70-17" wheels cruise over most of the nasty stuff without transmitting the worst of it through the order so the T2 invariably goes where you want it to. The SYM T2 250i boasts 4 piston Radial-Mounted Caliper Wave Discs. The 288mm diameter front disc is lightweight for reduced unsprung weight, while the single rear disc is 222mm. The brakes offer great feel and superb braking ability. The 4-way adjustable brake lever satisfies all demands from different riders.
The instrument cluster provides the rider with plenty of information, including: a digital display speedometer, odometer, tripmeter, fuel gauge, water coolant gauge and analog tachometer. The T2's seat has separate front & rear sections and textured seat material is used enhancing the visual appeal of the seat style. With a seat height of 31", average male and female riders are able to have both feet planted for a more secure ride.
With our price and the two-year factory warranty, the T2 250i offers the best value for quality, style and performance. Not only is this a great everyday motorcycle with all its convenience, it has the speed and agility to satisfy any rider. If you're looking for a highway-capable machine that does an outstanding job of providing urban transport, then check out the T2 250 at Second City Scooters.
- Front & Rear Hydraulic Disc Brakes
- Electric Start
- 4-stroke, water cooled engine,
- 6 speed manual transmission
- EPA & DOT Approved, C.A.R.B. Approved for CA
- 24 Months Limited Warranty
T2 250i Specifications
|Engine:||250cc, Fuel-Injected 4-Stroke Engine(OHC) 4 Valve Ceramic-Coated Cylinder|
|Top Speed:||87 mph|
|Government Certifications:||EPA & DOT Approved, C.A.R.B. Approved for CA|
|Warranty:||24 Months Limited Warranty|
|Type:||4-Stroke Engine(OHC) 4 Valve Ceramic-Coated Cylinder|
|Horsepower:||25 hp - 7500 RPM|
|Transmission:||6 Speed Manual|
|Top Speed:||87 mph|
|Frame:||High Strength Steel Diamond Type|
|Front Suspension:||Telescopic Fork|
|Rear Suspension:||Uni Swing|
|Front Brakes:||Disc (288 mm)|
|Rear Brakes:||Disc (222 mm)|
|Front Tires:||110 / 70-17 56P tubeless|
|Rear Tires:||140 / 70-17 64L tubeless|
|Net Weight:||384.1 Lbs|
|Fuel:||Unleaded (90 Octane or Higher)|
|Fuel Capacity:||3.69 Gallons|
SYM T2 250i Motorcycle
Here's how this works...
- Select the color of your SYM T2 250i, then click the Buy Now button.
- Log on to our secure online system, provide your payment information (credit cards, PayPal). Make sure to provide your phone number in the requested field. Then complete your purchase.
- When your motorcycle is ready, we'll contact you (via phone). This can take anywhere from 3 to 7 days.
- Stop by the shop and pick it up. You can pay for your Title & Registration at this time.
These guys rock! We shopped everywhere else first. But we were blown away when we got here. —Kelly B.
*Based on tests conducted in lab conditions. Actual mileage of the T2 250i may vary depending on vehicle condition, weather, rider weight and riding style.